- Interface – USB 2.0 / IEEE 1394a / 1394b
- Form Factor – 2.5
- Dimensions – 5.12 x 3.31 x 0.75
- Weight – 0.39 lbs.
Product DescriptionSamba lets you transform a 3. 5″ SATA hard disk drive into high-performance external storage. The daring Samba features a precision-extruded aluminum case in a seductive satin finish, whisper-quiet fanless operation, hot-plug-ability, and an on-off switch. The smart chassis design and fully-illustrated guide make installation as simple as humming your favorite tunes. And Samba’s near-silent operation will help you stay in the groove while you jam in tons of music, ph. . . More >>
Acomdata Samba USB 2.0 3.5-inch IDE/SATA Hard Drive Enclosure SMBXXXU2E-BLU
Comments
5 comments
March 9, 2010
cool device but it is fragile on the inside. found it pretty easy to set up and it has worked okay thus far
Rating: 3 / 5
March 9, 2010
When the motherboard in my old computer suddenly died, this product was suggested to me as a way of recovering data off the hard drive. The enclosure was simple to set up; the new computer didn’t recognize it at first, but then I switched the jumper settings on the old drive to “slave” and that was it. Transfer speed is great. The old drive had Windows XP and the new system is Vista, but this didn’t pose any problems. I am very happy so far – I can’t speak for long term use, but as a data recovery tool, this worked perfectly!
Rating: 5 / 5
March 9, 2010
This case is excellent, very quiet, doesn’t get that hot, and looks very stylist. If you are looking for a USB enclosure for your Hard Drive, look no further and buy this one. It comes in Black, Red and Blue colors. Very easy to put together. I give it 5 out of 5 Stars. Rating: 5 / 5
March 10, 2010
I bought the black model recently at a local store. Setup was easy. Initially, the hard drive didn’t work because I set it to the IDE master (as per instruction manual) – it worked after I switched it to cable select. Here are some thoughts on the device. Pros:- Exterior construction is solid. The black exterior in the picture is a big chunk of aluminum. The front and rear panels are plastic. – No fans! The large aluminum block seems to do a good job dissipating the heat. – Takes a PATA(IDE) or SATA hard drive. I’m using IDE, but the SATA option makes this case flexible for future drive. Cons:- The interior tray is mostly plastic. I mention this because I originally intended to swap out hard drives with this case to use some older drives. However, the interior construction isn’t that stable and I don’t think it will survive if I repeatedly swap the drives. – Doesn’t power down with PC. It uses a physical switch in the back, so the drive stays on after your PC has powered down. Overall, I recommend this drive enclosure. Rating: 4 / 5
March 10, 2010
I bought the black model recently at a local store. Setup was easy. Initially, the hard drive didn’t work because I set it to the IDE master (as per instruction manual) – it worked after I switched it to cable select. Here are some thoughts on the device. Pros:- Exterior construction is solid. The black exterior in the picture is a big chunk of aluminum. The front and rear panels are plastic. – No fans! The large aluminum block seems to do a good job dissipating the heat. – Takes a PATA(IDE) or SATA hard drive. I’m using IDE, but the SATA option makes this case flexible for future drive. Cons:- The interior tray is mostly plastic. I mention this because I originally intended to swap out hard drives with this case to use some older drives. However, the interior construction isn’t that stable and I don’t think it will survive if I repeatedly swap the drives. – Doesn’t power down with PC. It uses a physical switch in the back, so the drive stays on after your PC has powered down. Overall, I recommend this drive enclosure. Rating: 4 / 5